src Directory Reference

Directories
directory	eigen

Files
file	alphaCorrection.H [code]
	checks the boundedness of alpha (phase volume fraction)
file	alphaEqns.H [code]
	builds and solves the phase volume fraction equation.
file	alphaEqnsSubCycle.H [code]
file	BACheck.H [code]
	checks the boundedness of field variables related to the physical and chemical blowing agents.
file	BAEqns.H [code]
	builds the PDEs for the presence of different blowing agents. It also considers the user choice for the solution of PBE.
file	BASources.H [code]
	builds the RHS of PDEs for the blowing agents.
file	checkGellingPoint.H [code]
	checks if the gelling point reaches.
file	coalescenceKernel.H [code]
	constant coalescence kernel
file	coalescenceSource.H [code]
	source term due to bubbles coalescence
file	continuityErrors.H [code]
	calculates and reports the continuity error
file	conversionCheck.H [code]
	checks the boundedness of coversion values (for polyol and water).
file	conversionEqns.H [code]
	builds and solves conversion equations based on the kinetic model chosen.
file	conversionSources.H [code]
	builds the RHS of conversion equations based on the kinetics model chosen.
file	createFields.H [code]
	creates all the required field variables.
file	densityEqns.H [code]
	calculates the PU foam density
file	growthRate.H [code]
	three different functions for growth rate
file	growthSource.H [code]
	source term due to bubble growth
file	KineticsFields.H [code]
	creates the field variables related to the PU kinetics
file	KineticsFunctions.H [code]
	functions for kinetics calculations
file	modenaCalls.H [code]
	instantiates the surrogate models
file	modenaData.H [code]
	allocate memory for the surrogate models
file	MomConvert.H [code]
	converts moments based on the unit volume of foam
file	MomEqns.H [code]
	builds and solves moments equations
file	MomFields.H [code]
	creates the field variables related to the moments
file	MomSources.H [code]
	builds the RHS of PDEs for the moments.
file	pEqn.H [code]
	builds and solves pressure equation
file	PUFoam.C [code]
	macro-scale CFD tool for 3D simulation of foam expansion
file	readControls.H [code]
	read controls
file	rheologyFields.H [code]
	creates the field variables for the rheology
file	rheologyModel.H [code]
	implementatino of three rheology models including constant, Newtonian, and non-Newtonian
file	simulationMode.H [code]
	defines mold-filling and validation as two simulation modes
file	TCheck.H [code]
	checks the boundedness of temperature values
file	thermalFields.H [code]
	creates the field variables for the temperature equation
file	TSEqn.H [code]
	builds and solves the temperature equation
file	TSSource.H [code]
	builds the RHS of temperature equation
file	UEqn.H [code]
	momentum equation